¡¡¡Lanix X500B Original Rom - Firmware - Flash!!!

Iniciado por Ruroni, Octubre 09, 2017, 08:21:40 PM

Tema anterior - Siguiente tema

0 Miembros y 1 Visitante están viendo este tema.

Ruroni

Lanix X500B Rom - Servidor Mediafire


Logo de escritura con NCK:


CitarFlash files count is :11
Action : Firmware update.
Selected Model: 0-By CPU: MT6580
Exe version: NCKBox AndroidMTK 1.8.7.9
Scenario:
Safe Flash

Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM8)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
BaseBand CPU :MT6580_S00
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A48384731 : 000000000000000000
EMMC UA SIZE: 0x1d2000000     
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000      [7.293 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detecting high speed port, wait......
Detected : MediaTek DA USB VCOM (Android) (COM9)
Warning, flashing preloader disabled!
If you change android version, preloader must be flashed.
Flash EMMC Algo Start.
Preloader saved in firmware directory.
Starting flash.
Download firmware to flash now...
Wait untill phone will start charging.
All done.

Ruroni