¡¡¡Aporte Alcatel 4034G Unlock - Desbloqueo By NCK!!!

[Jaqen H'ghar]

1.- Celular apagado.
2.- Abrir NCK Modulo Android MTK.
3.- Elegir en Phone Setting la marca y el modelo correspondiente.
4.- Ir a la pestaña Unlock.
5.- Dar clic en Read Codes y conectar el equipo.
6.- Esperemos a que genere códigos.
7.- Colocar el chip de la compañía deseada e ingresar el código.

Selected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.8.8
Selected model: OT-4034G
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM326)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB  DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) TOSIBA 0x303038473730
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 110100303038473730 : 00000000000000
EMMC UA SIZE: 0x1d2000000     
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000      [7.293 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM267)
-Reading GPT Drive OK
MODEL FROM PROINFO: 4034G-2A6CMX1
SECRO FROM PROINFO: X3D0P503BS10
OTP IMEI: ***************
OTP IMEI: ***************
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:10) Code : 6684242515956779
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Locked (remain:10) Code : 2505893437906181
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Please note, some firmwares can display wrong codes.
Some firmwares can be hardlocked.
If this happen, perform direct unlock.
If direct unlock fail,use reset package from support.
If reset package not exist in support,request help in forum.
Wait untill phone will start charging.
All done.

[Jaqen H'ghar]