¡¡¡Aporte Moto G5 XT1670 FRP- Cuenta Google by Octopus FRP Tool!!!

[Ruroni]

- Bueno lo unico que debemos hacer es poner el telefono en Factory Mode desde FastBoot
- Lo conectamos a la PC, abrimos Octoplus FRP Tool, y clic en Reset FRP, y solo esperar, ya que hace todo

Platform: MOTOROLA
Selected model: XT1670
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: 8937.gen
Firmware released date: Mar 22 2017
Firmware released time: 21:15:58
Firmware compiled date: Mar 13 2017
Firmware compiled time: 23:00:00
SW version: MPSS.JO.2.0.c1.8-00016-8937_GENNS_PACK-1
Enabling "USB Debugging" mode...
Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...
Phone model: motorola Moto G (5)
SW version: NPP25.137-72
Date: Thu Apr 20 07:07:43 CDT 2017
Android version: 7.0
Baseband M8937_11.16.02.51R CEDRIC_LATAM_CUST
Detected phone model: XT1670
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.0.5 Software version.

PD. Si no se reinicia en automático, lo hacemos manualmente

[Jaqen H'ghar]

Welcome to Octoplus FRP Tool v.1.2.3
Platform: MOTOROLA
Selected model: XT1670
Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: 8937.gen
Firmware released date: Mar 22 2017
Firmware released time: 21:15:58
Firmware compiled date: Mar 13 2017
Firmware compiled time: 23:00:00
SW version: MPSS.JO.2.0.c1.8-00016-8937_GENNS_PACK-1
Enabling "USB Debugging" mode...
Searching for a phone. Please wait...
Enabling "USB Debugging" mode...
Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...
Phone model: motorola Moto G (5)
SW version: NPP25.137-82
Date: Fri Aug  4 05:53:52 CDT 2017
Android version: 7.0
Baseband M8937_11.16.02.51R CEDRIC_LATAM_CUST
Detected phone model: XT1670
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.2.3.0 Software version.

[Ruroni]

Uno mas... las instrucciones son las mismas de este tema: http://www.gsmarena.com.mx/index.php?topic=1382.0

[Ruroni]