¡¡¡Aporte Hisense F23 Reset Privacy (Codigo Privacidad) by NCK Dongle!!!

[Ruroni]

- Abrir Nck Android MTK
- Elegir el modelo Hisense F23
- Desde la pestaña FRP - PATTERN - PRIVACY clic en Reset Privacy
- Conectar apagado y es todo

Exe version: NCKDongle AndroidMTK 2.5.9.1
Selected model: F23
Action: Reset Privacy
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : PreLoader USB VCOM Port (COM18)
Boot mode: Preloader
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 2 GB  DRAM
----------------------------------------------------
EMMC: (117Gb+16384Mb) HYNIX 0x484147346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A484147346132 : 00000000000000
EMMC UA SIZE: 0x3ab400000     
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3ac000000      [14.688 GB]
-Reading GPT Drive OK
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : DA USB VCOM Port (COM32)
Dumping data, wait.
Value found, processing[010c][00460000]
Resetting phone.
FORMAT EMMC FLASH :  BEGIN: 0x6c00000        - LEN: 0x2000000       
Wait untill phone will start charging.
All done.

[Ruroni]