¡¡¡Aporte ZTE A602 FRP - Cuenta Google by NCK!!!

Iniciado por Jaqen H'ghar, Mayo 07, 2018, 07:04:23 PM

Tema anterior - Siguiente tema

0 Miembros y 2 Visitantes están viendo este tema.

Jaqen H'ghar

1.- Celular apagado.
2.- Abrir NCK plataforma Android MTK.
3.- En phone Setting elegir ZTE y Blade L5.
4.- Ir a la pestaña FRP-Pattern-Privacy.
5.- Conectar el equipo y esperar.


CitarExe version: NCKBox AndroidMTK 1.8.8.8
Selected model: Blade L5
Action: Reset FRP

Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
Boot mode: Preloader
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB  DRAM
----------------------------------------------------
EMMC: (116Gb+8192Mb) SAMSUNG 0x464531324d42
EMMC FW VERSION: 0d:00:00:00:00:00:00:00
EMMC CID: 150100464531324D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000     
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000      [14.572 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM20)
-Reading GPT Drive OK
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.

Jaqen H'ghar

El segundo

CitarExe version: NCKBox AndroidMTK 1.8.8.8
Selected model: Blade L5
Action: Reset FRP

Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
Boot mode: Preloader
Using Algo 2.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB  DRAM
----------------------------------------------------
EMMC: (116Gb+8192Mb) SAMSUNG 0x464531324d42
EMMC FW VERSION: 0d:00:00:00:00:00:00:00
EMMC CID: 150100464531324D42 : 00000000000000
EMMC UA SIZE: 0x3a3e00000     
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x3a4a00000      [14.572 GB]
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM20)
-Reading GPT Drive OK
Checking data, wait...

Erasing FRP, wait...
FRP Reset Done.
Wait untill phone will start charging.
All done.

Jaqen H'ghar