¡¡¡Aporte Motorola XT1641 (Moto G4 Plus) FRP - By Octopus FRP Tool!!!

Iniciado por Ruroni, Noviembre 27, 2017, 12:05:21 PM

Tema anterior - Siguiente tema

0 Miembros y 1 Visitante están viendo este tema.

Ruroni

- Lo unico que debemos hacer Nosotros es Poner el Telefono en Factory Mode y clic en Reset FRP
- El programa hace TODOOOOOO!!!

Citar
Platform: MOTOROLA
Selected model: XT1641

Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: 8952.gen
Firmware released date: May 31 2017
Firmware released time: 06:30:21
Firmware compiled date: May 17 2017
Firmware compiled time: 02:00:00
SW version: MPSS.TA.2.1.c3-00025-8976_GEN_PACK-1.80110.1.99393.1
Enabling "USB Debugging" mode...
Searching for a phone. Please wait...
Enabling "USB Debugging" mode...
Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...

Phone model: motorola Moto G (4)
SW version: NPJS25.93-14-10
Date: Mon Aug 28 09:20:48 CDT 2017
Android version: 7.0
Baseband M8952_70030.25.03.62.01R ATHENE_LATAM_CUST
Detected phone model: XT1641
Resetting FRP lock..
FRP lock is successfully reseted!

Performed by 1.0.3 Software version.

beathso


Ruroni

Octopus Frp Tool - Debes tener Octopus Box
Obvio no es la unica herramienta que lo hace

Jaqen H'ghar

Comprobado

CitarPlatform: MOTOROLA
Selected model: XT1641

Put the phone into Factory Mode:
1. Power phone OFF;
2. Press and hold "Vol-" + "Power" buttons;
3. Select Factory Mode, then confirm your selection;
4. Wait until the phone Power ON;
5. Connect USB cable.
Searching for a phone. Please wait...
Phone found.
Reading info...
Phone model: 8952.gen
Firmware released date: Dec 15 2016
Firmware released time: 01:08:30
Firmware compiled date: Dec 06 2016
Firmware compiled time: 00:00:00
SW version: MPSS.TA.2.1.c3-00025-8976_GEN_PACK-1.79295.1.80110.1
Enabling "USB Debugging" mode...
Put the phone in Factory Mode:
1. Disconnect USB cable;
2. Power OFF the phone;
3. Press "Vol-" and "Power" buttons;
4. Select Factory Mode then confirm your selection;
5. Wait until phone is power ON and connect USB Cable;
6. Install necesarry drivers then press "OK" button
Please, press "OK" button on the phone to allow USB debugging..
Searching for a phone (waiting for ADB device)...
Phone found.
Reading info...

Phone model: motorola Moto G (4)
SW version: NPJ25.93-14
Date: Fri Jan  6 04:58:11 CST 2017
Android version: 7.0
Baseband M8952_70030.25.03.62R ATHENE_LATAM_CUST
Detected phone model: XT1641
Resetting FRP lock..
FRP lock is successfully reseted!
Performed by 1.1.4 Software version.

Jaqen H'ghar