¡¡¡APORTE SAMSUNG G928V FRP!!!

[Ruroni]

G928V FRP by Octopus Box FRP Tool (Bit 3 - Bin 3) 7.0

- Abrir Octopus Box FRP Tool
- Elegir el modelo G928V
- Elegir el metodo Reset FRP Uart y clic
- Conectamos por USB en modo Downloading
- Despues de reconocerlo nos pedira que los conectemos...
- ... por medio UART usando el cable C3300K
- Lo conectamos y presionamos al mismo tiempo Volumen Abajo + Power
- Cuando se apague, solo dejamos presionando Volumen Abajo y listo

Welcome to Octoplus FRP Tool v.1.5.9.0

Platform: SAMSUNG
Selected model: SM-G928V
To put SM-G928V into Download Mode, You have to perform the following steps:
1. Reconnect the battery.
2. Press and hold "Volume-" + "Home" + "Power ON" keys.
3. When phone turns on, press "Volume+" key.
Searching for a phone. Please wait...
Phone found.
Initializing..
PIT was read successfully.
Searching for UART interface.. COM99
Connect Samsung Micro UART cable(with 525K resistor), press and hold "Vol-" + "Power" buttons for 15-20 seconds
Searching for device. Please wait...
Resetting FRP lock..
FRP lock is successfully reseted!
Wait 3-4 min then goto "Menu -> Settings -> Backup and reset" and make "Factory data reset"
Performed by 1.5.9.0 Software version.

[Ruroni]