¡¡¡Aporte Alcatel 5010G Unlock - Liberación by NCK Dongle!!!

[Ruroni]

- Abrimos NCK Dongle y elegimos el modelo 5010G y en la pestaña Unlock solo damos clic en modo Flash Mode Unlock

Selected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.8.3
Selected model: OT-5010G
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 1.
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB  DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847316505
EMMC FW VERSION: 07:00:00:00:00:00:00:00
EMMC CID: 90014A48384731 : 000000000000000000
EMMC UA SIZE: 0x1d2000000     
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000      [7.293 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
MODEL FROM PROINFO: 5010G-2ATLMX2
SECRO FROM PROINFO: X5E0P501BS10
OTP IMEI: ---
OTP IMEI: ---
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:10) Code : 1721696642003743
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Locked (remain:10) Code : 0229354748199947
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Unlocking target...please wait.

• Unlock finished.
  [1]Unlock finished.
  Wait untill phone will start charging.
  All done.

[Jaqen H'ghar]

Selected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.9.2
Selected model: OT-5010G
Action: Unlock
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM132)
Boot mode: Preloader
Using Algo 1.
Phone detected...Please wait
Sending DA agent, please wait...
----------------------------------------------------
BaseBand CPU :MT6580
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB  DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) SAMSUNG 0x463732324d42
EMMC FW VERSION: 00:00:00:00:00:00:00:00
EMMC CID: 150100463732324D42 : 00000000000000
EMMC UA SIZE: 0x1d2000000     
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2880000      [7.290 GB]
-Reading GPT Drive OK
Status: USB_HIGH_SPEED
Detecting high speed port, wait......
If driver not installed, install high speed port driver.
If not need high speed port, disable it.
After repeat opperation.
Detected : MediaTek DA USB VCOM (Android) (COM445)
MODEL FROM PROINFO: 5010G-2HTLMX2
SECRO FROM PROINFO: L5E2P584BS10
OTP IMEI: ***************
OTP IMEI: ***************
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:0) Code : 0794918438344362
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Locked (remain:10) Code : 6904236255446133
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
[3140]Unlocking target...please wait

• Unlock finished.
  [1]Unlock finished.
  CHK updated ok.
  Wait untill phone will start charging.
  All done.[/b]

[Jaqen H'ghar]