¡¡¡Aporte Motorola Xt1756 (Moto C) Unlock - Liberacion By NCK!!!

Iniciado por Jaqen H'ghar, Enero 02, 2018, 08:55:09 PM

Tema anterior - Siguiente tema

0 Miembros y 1 Visitante están viendo este tema.

Imprimir
Ir Abajo Páginas1
Acciones del Usuario

Jaqen H'ghar

Enero 02, 2018, 08:55:09 PM
1.- Activar Depuración USB y modo OEM.
2.- Abiri el modulo NCK Andorid MTK.
3.- Elegir la marca Motorola y elegir el modelo.
4.- Dar en leer códigos .
5.- Conectar el celular apagado y esperar a que los genere.

CitarSelected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.8.3
Selected model: XT1756
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 2.
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB  DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A48384734 : 000000000000000000
EMMC UA SIZE: 0x1d2000000     
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000      [7.293 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
IMEI[1]: ***************
IMEI[2]: 000000000000000
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:96) Code : 2720076277031038
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Unlocked (remain:5) Code : 
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Please note, some firmwares can display wrong codes.
Some firmwares can be hardlocked.
If this happen, perform direct unlock.
If direct unlock fail,use reset package from support.
If reset package not exist in support,request help in forum.
Wait untill phone will start charging.
All done.

PD: Si no detecta el celular apagado lo conectan en modo fastboot (boton abajo y power ) esperas a que instale el driver. Una vez instalado le quitas la pila y vuelven a hacer el proceso

Ruroni

#1
Enero 10, 2018, 10:33:33 AM
otro logo mas:

CitarSelected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.8.3
Selected model: XT1756
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 2.
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB  DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A48384734 : 000000000000000000
EMMC UA SIZE: 0x1d2000000     
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000      [7.293 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
IMEI[1]: ---
IMEI[2]: 000000000000000
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:99) Code : 6489971629867942
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Unlocked (remain:5) Code : 
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Please note, some firmwares can display wrong codes.
Some firmwares can be hardlocked.
If this happen, perform direct unlock.
If direct unlock fail,use reset package from support.
If reset package not exist in support,request help in forum.
Wait untill phone will start charging.
All done.

marcomax

#2
Febrero 25, 2019, 10:49:33 AM
Excelente aporte colega, salio al 100

Cita de: Jaqen H'ghar en Enero 02, 2018, 08:55:09 PM
1.- Activar Depuración USB y modo OEM.
2.- Abiri el modulo NCK Andorid MTK.
3.- Elegir la marca Motorola y elegir el modelo.
4.- Dar en leer códigos .
5.- Conectar el celular apagado y esperar a que los genere.

CitarSelected connection metod: FLASH Mode
Exe version: NCKBox AndroidMTK 1.8.8.3
Selected model: XT1756
Reinsert phone battery.
Battery must be charged.
Phone must be off with battery inside.
Please insert USB cable now...
Detected : MediaTek PreLoader USB VCOM (Android) (COM16)
Boot mode: Preloader
Phone detected...Please wait
Sending DA agent, please wait...
Using Algo 2.
----------------------------------------------------
BaseBand CPU :MT6737M
BaseBand CPU Secure Version : FF
BaseBand CPU Bootloader Version : 01
----------------------------------------------------
INT RAM: 128 KB SDRAM
EXT RAM: 1 GB  DRAM
----------------------------------------------------
EMMC: (58Gb+8192Mb) HYNIX 0x483847346132
EMMC FW VERSION: a5:00:00:00:00:00:00:00
EMMC CID: 90014A48384734 : 000000000000000000
EMMC UA SIZE: 0x1d2000000     
BOOT STYLE: EMMC BOOT
FULL LENGTH: 0x1d2c00000      [7.293 GB]
Preloader SEC version: 2
Status: USB_HIGH_SPEED
IMEI[1]: ***************
IMEI[2]: 000000000000000
Reading security, wait...
SIM[1]:
Block1(N): Locked (remain:96) Code : 2720076277031038
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
SIM[2]:
Block1(N): Unlocked (remain:5) Code : 
Block2(NS): Unlocked
Block3(SP): Unlocked
Block4(C): Unlocked
Please note, some firmwares can display wrong codes.
Some firmwares can be hardlocked.
If this happen, perform direct unlock.
If direct unlock fail,use reset package from support.
If reset package not exist in support,request help in forum.
Wait untill phone will start charging.
All done.

PD: Si no detecta el celular apagado lo conectan en modo fastboot (boton abajo y power ) esperas a que instale el driver. Una vez instalado le quitas la pila y vuelven a hacer el proceso

marcomax

#2
Febrero 25, 2019, 10:49:33 AM
Imprimir
Ir Arriba Páginas1
Acciones del Usuario